Home » Plumbing Services
Kempsville Plumbing Company handles plumbing work for homeowners, renters, landlords, property managers, and businesses throughout Kempsville and the broader Virginia Beach area. From a dripping faucet to a sewer line backup, from a failed water heater to a whole-home repipe, we cover the full range of residential and commercial plumbing. We are available every day from 6:30 AM to 9:00 PM, so whether you are scheduling a planned repair or dealing with something that cannot wait, you can reach us during hours that work for most people. We protect your home. We fix your pipes. We earn the call.
Call (757) 656-3293 for a quote.
This area has every kind of pipe and fixture in it, from older galvanized lines in mid-century homes to modern PEX in newer construction. We work on all of it. Whether the job is a slow drain in a bathroom, a leaking pipe under a kitchen sink, a water heater that stopped producing hot water, or a shutoff valve that will not close all the way, we scope the problem first and get to work once the price is confirmed. Code-compliant plumbing on every job is not a standard we adjust depending on the size of the project.
Slow drains and backed-up lines are among the most common calls we get. The fix depends on what is causing the blockage. We inspect the line, identify where the clog is located, clear it, and test the flow before we leave. For stubborn buildup in main lines or kitchen drain stacks, hydro jetting pushes through grease, scale, and debris that a standard snake will not reach. The result is a clear line, not just a temporary path through the obstruction.
Hidden leaks can run for weeks before a homeowner notices the water bill climbing or a wall starts to show moisture. We use pressure testing and electronic detection methods to find where a leak is originating without tearing into walls unnecessarily. Once the source is located, we repair or replace the affected section of pipe and test the system to confirm the leak is resolved. We'll find it, fix it, and test it before we leave.
A running toilet can waste a significant amount of water before the problem is addressed. We repair and replace toilets, diagnose flush problems, and handle overflow situations. For faucets, we repair drips, replace cartridges and valves, and install new kitchen and bathroom faucets when replacement makes more sense than repair. We also handle full fixture replacements, including bathroom fixture installation as part of a remodel. Garbage disposal repair, replacement, and new installation round out this part of our work.
Low water pressure can point to a partially closed valve, a failing pressure regulator, a corroded pipe, or a leak somewhere in the supply line. We diagnose the cause rather than guess at it. Main water shutoff valves that are stuck or leaking get repaired or replaced before they become an emergency. For homes with old galvanized pipe throughout, a whole-home repipe using PEX removes the source of the problem rather than patching one section at a time. Call us and we'll walk you through the repair.
From a single shutoff valve to a whole-home repipe, the water goes off first, and the same is true when a water heater fails. No hot water is one of the more urgent calls we receive, and we handle it for both tank and tankless units. If the unit can be repaired, we repair it. If the tank has reached the end of its useful life or the damage is too extensive, we replace it and handle the water line connections, the gas line if applicable, and the disposal of the old unit. The price is confirmed on the call before anything is scheduled, so you know what the job costs before we start. The plumbing done properly, start to finish is the standard we hold on every water heater job, whether it is a straightforward tank swap or a more involved installation. Call now and we'll lock in your appointment.
Kempsville sits in a part of Virginia Beach where the housing stock spans several decades, the water table runs high, and the coastal climate puts consistent pressure on plumbing systems. Clay-heavy soils shift with seasonal moisture changes, older slab-on-grade construction is common throughout the area, and the humidity accelerates corrosion in pipes that have been in the ground for a long time. The three services below come up regularly here for reasons that are specific to this area, and we handle all three.
Older clay and cast-iron sewer lines are common in established Kempsville neighborhoods, and they are prone to root intrusion, joint separation, and buildup that restricts flow over time. When soil shifts with heavy rain or seasonal changes in the water table, those problems get worse faster. A sewer backup is not just an inconvenience. It is a sign that the main line needs attention. We run a camera inspection of the line to see exactly what is happening, clear the blockage, and confirm flow is restored before we wrap up. If the line has more serious damage, we go over the repair options with you on the spot.
Slab-on-grade construction is widespread in Virginia Beach, and the copper supply lines running beneath those slabs are subject to corrosion, soil movement, and the slow wear that comes with age. A slab leak can go undetected for a while, showing up first as warm spots on the floor, a water bill that does not match usage, or a drop in water pressure with no obvious cause. We use pressure testing and electronic detection to locate the leak without unnecessary demolition. Repair options range from a targeted spot repair to rerouting the line above the slab, depending on the condition of the pipe and the location of the leak. Prompt response, even for last-minute plumbing calls, matters on a slab leak because the longer it runs, the more material it affects.
Tankless water heaters are a practical upgrade for many homes in this area. Smaller homes benefit from the space savings, and the coastal humidity takes a real toll on tank units over time, accelerating corrosion and shortening the useful life of a conventional tank. A tankless unit heats water on demand, which changes how the water line and gas line need to be configured. We handle the sizing, the supply line work, the gas line connection where applicable, and the venting requirements that fall on the plumbing side of the installation. We also service and repair existing tankless units when performance drops or the unit stops producing hot water reliably.
What sets this plumbing service apart is straightforward: we work across the full range of property types and we treat each job the same way regardless of size. For homeowners, that means repairs and installations handled without unnecessary upselling. For renters dealing with a plumbing problem in a unit, we coordinate with landlords and property managers to get the work scheduled efficiently. For landlords and property managers overseeing multiple units, we handle multi-unit drain issues, fixture replacements, water heater swaps, and plumbing inspections before a new tenant moves in or a property goes on the market.
On the commercial side, we handle drain cleaning for restaurants and retail spaces, water heater replacement for businesses with high hot-water demand, and plumbing work for new construction and renovation projects. A plumbing inspection before a remodel or a purchase gives you a clear picture of what the system looks like before work begins. Being local means we're easy to reach and easy to work with, and that matters when a property manager needs a fast answer or a business cannot afford to have a restroom out of service. Call us and we'll confirm what the schedule allows.
Your time matters, so we keep the plumbing job moving from the first call through the final check. We take short-notice work and urgent calls, and a real person answers to scope the job and get you on the schedule. A burst pipe, a major leak, or a complete loss of hot water are the kinds of problems that cannot sit on a list until next week. When you call, you reach someone who can scope the job on the phone and get you on the schedule. We know this area. We know its older pipes. Leaks traced to the source.
Call (757) 656-3293 for a quote or to ask what appointment times are available.
Plumbing repair costs vary depending on what the job involves, and the only honest answer to "how much does this cost?" is the one you get after the job is scoped. When you call, we go over what the work entails and give you a price before anything is scheduled. Drain cleaning, water heater replacement, pipe repair, slab leak repair: you can ask about any of these directly and get a straight answer on the call. Pricing is explained up front so you know what you are agreeing to before the visit begins. There are no rates invented on this page because the actual price depends on the actual job.
We work throughout Kempsville and the surrounding communities within Virginia Beach and the wider Hampton Roads region. That includes Great Neck, Bayside, Lynnhaven, the Oceanfront area, Princess Anne, Birdneck, as well as nearby Chesapeake and Norfolk. If you are unsure whether your address falls within our service area, call and ask.
The most common signs are warm or damp spots on the floor, a water bill that climbs without a change in usage, and a drop in water pressure with no obvious cause. Some homeowners notice damp carpet near an exterior wall or a faint sound of running water when all fixtures are off. Slab-on-grade construction is widespread in Virginia Beach city, and the copper supply lines beneath those slabs are subject to corrosion and soil movement over time. Call us if you notice any of these symptoms and we will scope the situation on the call.
We use pressure testing to confirm the system is losing water and electronic detection methods to narrow the location of the leak before any concrete is touched. The goal is to find the source with as small an access point as possible. Repair options depend on what the inspection finds: a targeted spot repair, a pipe reroute above the slab, or a more involved fix if the pipe condition warrants it. Prompt response on a slab leak matters because the longer it runs, the more material it affects.
If only one fixture is draining slowly, the blockage is likely in the branch line serving that fixture. When multiple fixtures back up at the same time, or when flushing a toilet causes water to appear in a tub or floor drain, the main sewer line is the more likely cause. We inspect the line to confirm where the blockage is before clearing it. Treating a main line problem as a fixture-level clog just delays the real fix.
We run a camera through the sewer line to get a direct view of what is happening inside the pipe. The inspection shows root intrusion, joint separation, pipe collapse, buildup, and other conditions that cause backups or slow flow. It is how we confirm the cause before recommending a repair approach, so the work addresses what is actually there. A camera inspection is standard practice before a sewer line repair or replacement.
A burst pipe, a major active leak, a complete sewer backup affecting multiple fixtures, or a total loss of hot water are the most common plumbing emergencies we handle. Any situation where water is actively damaging the property or where a basic function of the home or business is completely out of service warrants an urgent call. We are available every day from 6:30 AM to 9:00 PM and take short-notice calls within those hours.
Call (757) 656-3293 and describe what is happening so we can scope it on the call.
We take emergency calls and work to address them as quickly as the schedule allows. The scope and price are confirmed on the call before anything is dispatched. We do not promise a specific arrival window, but urgent calls are answered directly and handled as a priority.
Call (757) 656-3293 to find out what is available.
Someone needs to be present to provide access and to confirm the scope of the work before it starts. If you cannot be there yourself, you can designate another adult to be present. For rental properties, property managers often coordinate access with us directly. Let us know the arrangement when you schedule and we will work with it.
A water heater that is leaking at the base, making rumbling or popping sounds, delivering inconsistent water temperature, or producing discolored water is showing signs of wear that are worth addressing before the unit fails completely. Age is also a factor: a tank unit that has been in service for many years is more likely to fail without much warning. Call us if you are noticing any of these signs and we will go over whether repair or replacement makes more sense based on what the unit is doing.
A repair addresses a specific component that has failed: a heating element, a thermostat, a valve, or a connection. A replacement is the right call when the tank itself is leaking, the unit is at the end of its useful life, or the cost of the repair is close to the cost of a new unit. We go over both options on the call and give you a price for each when both are viable. The decision is yours once you have the numbers.
A tankless unit heats water on demand rather than keeping a full tank warm continuously, which reduces energy use over time. For homes in Virginia Beach city, the coastal humidity accelerates corrosion in tank units, which can shorten their useful life compared to manufacturer estimates. Tankless units also take up significantly less space, which matters in smaller homes. We handle the sizing, the water and gas line connections, and the venting work that falls on the plumbing side of the installation.
Galvanized steel supply lines corrode from the inside out over decades, and the buildup narrows the interior of the pipe until pressure drops noticeably. By the time a homeowner notices the pressure change, the pipe has often already narrowed significantly. Recurring leaks at threaded joints in galvanized pipe are a related symptom: the corroded material no longer holds a seal reliably. The long-term fix is replacing the affected pipe rather than patching individual joints as they fail.
A targeted repair makes sense when the problem is isolated to one section of pipe or one joint. A full repipe is the right call when leaks are recurring in multiple locations, when the pipe material throughout the home has reached the end of its useful life, or when water quality and pressure have declined across the whole system. Homes in Kempsville with original galvanized steel supply lines are common repiping candidates. We inspect the system and go over what the situation actually calls for before recommending one approach over the other.
Water stains on walls or ceilings, a mildew smell without an obvious source, soft or warped flooring, and a water bill that climbs without a change in usage are all signs that water is going somewhere it should not. Hidden leaks can run for weeks before they become visible. We use pressure testing and electronic detection methods to locate the source without unnecessary demolition. Finding the leak early limits the amount of material that needs to be repaired or replaced.
We confirm the scope on site, go over the replacement options and the cost, and proceed once you approve the plan. For a pipe replacement, the water is shut off to the affected section or the whole home depending on what is being replaced. For a water heater, the old unit is disconnected, removed, and the new unit is installed and tested before we leave. The job is not considered done until the system is running correctly and confirmed to be leak-free.
Residential repairs, commercial plumbing, emergency calls, and everyday installations: we handle all of it, every day from 6:30 AM to 9:00 PM. We protect your home. We fix your pipes. We earn the call.
Call (757) 656-3293 for a quote. We'll find it, fix it, and test it before we leave.
We handle the full range of plumbing work for homes and businesses in Kempsville and across Virginia Beach, from a dripping faucet to a sewer line backup to a whole-home repipe. The table below gives you a quick look at what each service covers, who it fits, and a practical note worth knowing before you call. If you have questions about a specific job, call us and we will go over the details on the phone before anything is scheduled.
| Service Type | What the Job Covers | Recommended For | Worth Knowing |
|---|---|---|---|
| Sump Pump Installation | Sump pit assessmentPump installation and discharge line connectionFloat switch setup and testingBackup pump options | Homes with crawl spaces or low-lying areas prone to groundwater intrusion, particularly given Virginia Beach's high water table | Virginia Beach sits in a low-elevation coastal area where the water table runs high, making a properly installed sump pump a practical line of defense against groundwater intrusion. |
| Sewer & Main Line Service | Camera inspection of the sewer lineRoot intrusion and blockage clearingHydro jetting for heavy buildupLine repair or replacement | Sewer backups, gurgling drains, slow flow across multiple fixtures, or older clay and cast-iron lines in established neighborhoods | Older Kempsville neighborhoods commonly have clay or cast-iron sewer lines that are prone to root intrusion and joint separation as soil shifts with seasonal moisture changes. |
| Faucet & Fixture Installation | Cartridge and valve repairKitchen and bathroom faucet replacementFull fixture installationSupply line and shutoff work | Dripping faucets, fixture upgrades, bathroom remodels, or fixtures that cannot hold a reliable seal | When the cost of repairing an older faucet approaches the cost of a new unit, replacement usually makes more practical sense. |
| Water Pressure & Shutoff Valve Repair | Pressure regulator diagnosisShutoff valve repair or replacementSupply line inspectionWhole-home pressure testing | Noticeably low pressure, a main shutoff that is stuck or leaking, or pressure that has dropped gradually over time | A failing pressure regulator can affect every fixture in the home at once, so diagnosing the cause before replacing parts saves time and cost. |
| Water Heater Repair & Replacement | Tank and tankless unit diagnosisComponent repair or full replacementWater and gas line connectionsOld unit removal | No hot water, inconsistent temperature, leaking tanks, or a unit showing signs of age | Coastal humidity in Virginia Beach accelerates corrosion on tank units, which can shorten their useful life compared to manufacturer estimates. |
| Emergency Plumbing | Burst pipe responseMajor active leak containmentSewer backup on multiple fixturesLoss of hot water | Any situation where water is actively damaging the property or a basic function of the home is completely out of service | We are available every day from 6:30 AM to 9:00 PM and take short-notice calls within those hours. The scope and price are confirmed on the call before anything is scheduled. |
| Leak Detection & Repair | Pressure testingElectronic leak locationPipe section repair or replacementSystem confirmation after repair | Rising water bills, moisture on walls or ceilings, or a drop in pressure with no obvious cause | Finding the source before opening walls keeps the repair focused and limits the amount of material that needs to be replaced. |
| Slab Leak Detection & Repair | Pressure testing to confirm lossElectronic detection under the slabSpot repair or line reroutePost-repair system check | Warm spots on the floor, unexplained pressure drops, or a water bill that does not match usage in a slab-on-grade home | Virginia Beach has a high concentration of slab-on-grade construction, and copper lines beneath those slabs are subject to corrosion and soil movement over time. |
| Drain Cleaning & Clog Removal | Camera inspection of the lineSnaking and hydro jettingFlow testing after clearingKitchen and main drain stacks | Slow drains, recurring backups, or grease and scale buildup in older lines | Hydro jetting clears buildup that snaking pushes through but leaves behind, making it the better call on heavily scaled lines. |
| Garbage Disposal Service | Jam diagnosis and clearingComponent repairFull disposal replacementDrain connection and testing | Disposals that hum but do not spin, units that leak at the sink flange, or older units that have stopped working reliably | A disposal that trips its reset button repeatedly is usually signaling a motor or wiring issue rather than a simple jam. |
| Tankless Water Heater Installation | Unit sizing for the homeWater and gas line configurationVenting work on the plumbing sideExisting tankless unit repair | Homeowners replacing a corroded tank unit, smaller homes with limited space, or those looking to reduce standby energy use | A tankless unit heats water on demand, which changes how the supply and gas lines need to be configured compared to a standard tank installation. |
| Water Softening & Treatment | Water quality assessmentSoftener installation and connectionTreatment system setupSupply line integration | Homes with hard water causing scale buildup on fixtures, water heaters, and supply lines | Hard water accelerates scale buildup inside pipes and on heating elements, which can shorten the life of a water heater and reduce fixture performance over time. |
| Toilet Repair & Installation | Flush mechanism diagnosis and repairFill valve and flapper replacementFull toilet replacementOverflow and seal work | Running toilets, weak or incomplete flushes, leaks at the base, or a unit that needs full replacement | A running toilet can waste a significant amount of water before the problem is addressed, so early repair is worth scheduling promptly. |
| Repiping (PEX) | Whole-home supply line replacementGalvanized pipe removalPEX installation throughoutPressure and leak testing after completion | Homes with original galvanized steel supply lines, recurring leaks at multiple joints, or pressure that has declined across the whole system | PEX is resistant to the corrosion that shortens galvanized pipe life, and a full repipe addresses the source of recurring problems rather than patching one section at a time. |
What causes a faucet or fixture to drip even after it has been tightened?
A drip that returns after tightening almost always points to a worn internal component rather than a loose connection. Cartridges, O-rings, and valve seats wear down over time and stop forming a reliable seal. Tightening the handle compresses the worn part temporarily, but the drip returns once the pressure eases. We diagnose which component has failed and replace it. In some cases, the valve body itself is worn to the point where a new faucet makes more sense than a repair.
What does hydro jetting clear that a standard drain snake cannot?
A drain snake breaks through a blockage and creates a path for water to move, but it does not remove the buildup clinging to the pipe walls. Grease, mineral scale, and compacted debris stay behind and narrow the line again quickly. Hydro jetting uses high-pressure water to scour the interior of the pipe, removing that buildup along with the blockage. The result is a cleaner line that stays clear longer. We use it on kitchen drain stacks, main sewer lines, and any line where buildup is the underlying problem rather than a single obstruction.
How do tree roots get into a sewer line and what does the repair involve?
Roots follow moisture, and older clay and cast-iron sewer lines develop small cracks and joint separations over time that let moisture escape. Roots find those openings and grow into the pipe, eventually restricting or blocking flow entirely. We run a camera inspection to confirm root intrusion and locate where it is occurring. Clearing the roots restores flow, but if the line has significant joint separation or structural damage, repair or replacement of the affected section is the more lasting fix. We go over what the camera finds and what the repair options are before any work is authorized.
Cause Found Before Anything Is Replaced
We inspect and test before recommending a repair approach. Whether it is a hidden leak, a sewer line problem, or a water heater that stopped working, the cause is confirmed before any part is replaced or any line is opened.
What causes low water pressure in a home and how is it diagnosed?
Low pressure can come from several different sources: a partially closed shutoff valve, a failing pressure regulator, corrosion narrowing the interior of older galvanized supply lines, or a leak somewhere in the system that is diverting water before it reaches the fixtures. We work through the likely causes systematically rather than replacing parts at random. Pressure testing helps confirm whether the issue is in the supply entering the home or in the distribution lines inside it. Homes in Kempsville with original galvanized steel supply lines often see pressure drop as the pipe interior narrows with corrosion over time.
What is the difference between a tank and a tankless water heater, and which is right for my home?
A tank water heater stores a fixed volume of hot water and keeps it warm continuously. A tankless unit heats water on demand as it flows through the unit, which eliminates standby heat loss. The right choice depends on how much hot water the household uses at once, the available gas line capacity if it is a gas unit, and the space available for installation. In Virginia Beach, the coastal humidity accelerates corrosion on tank units, which is one reason many homeowners in this area consider a tankless upgrade when their tank reaches the end of its useful life. We go over both options and the costs on the call.
When should I call a plumber instead of attempting a DIY repair?
Simple tasks like replacing a showerhead or a toilet flapper are manageable for most homeowners. The line shifts when the repair involves supply or drain lines behind walls, main shutoff valves, water heater connections, gas lines, or anything that requires opening the wall or floor. A mistake on a supply line or a gas connection can cause water damage or a safety hazard that costs far more to address than the original repair. If you are unsure whether the job is within scope, call us and describe what you are seeing. We can often help you figure out on the phone whether it is something you can handle or something that needs a visit.
Code-Compliant Work on Every Job
Every repair and installation is completed to the code that applies to this area. That covers water heater replacements, sewer line work, repiping, and fixture installations, regardless of the size of the job.
How long does a water heater replacement typically take?
Most standard tank water heater replacements take a few hours from the time work begins to the time the new unit is tested and confirmed to be operating correctly. The timeline includes disconnecting and removing the old unit, making the water and gas or electrical connections on the new one, and running the system through a full check before we leave. Tankless installations take longer because the supply line, gas line, and venting configuration often need to be adjusted to match the new unit's requirements. We give you a realistic time estimate on the call based on what the job involves.
What should I do if a pipe bursts or a major leak starts before I can reach a plumber?
Locate the main water shutoff and close it to stop water from continuing to flow. If you do not know where the main shutoff is, check near the water meter, which is typically at the street or near the foundation. Once the water is off, the damage stops accumulating.
Call us at (757) 656-3293 and describe what happened so we can scope the repair on the call and get you on the schedule.
Do not attempt to reopen the supply until the damaged section has been repaired and tested.
Older and Newer Plumbing Both Handled
Kempsville and the surrounding Virginia Beach area have housing stock that spans several decades, from mid-century homes with galvanized supply lines to newer construction with PEX throughout. We work on all of it.
How does pricing work for plumbing repairs and installations?
The price depends on what the job actually involves, and the only accurate answer is the one you get after the scope is confirmed. When you call, we go over what you are seeing, ask the relevant questions, and give you a price before anything is scheduled. There is no rate we can publish on a page that applies to every situation, because a drain cleaning on a short accessible line and one on a long cast-iron main are not the same job. You get the price on the call, before any visit is confirmed, so you know what you are agreeing to.
What are the signs that a sump pump is failing or needs replacement?
A sump pump that runs continuously, makes unusual noise, cycles on and off rapidly, or fails to activate when water enters the pit is showing signs of wear. Visible rust or corrosion on the unit, or a pump that is more than several years old and has never been serviced, is worth having inspected before the next heavy rain. Virginia Beach sits in a low-elevation coastal area with a high water table, which means a sump pump failure here is more likely to result in actual water intrusion than it would be in a drier region. We assess the pump and the pit and go over whether repair or replacement is the right call.
How is a whole-home repipe carried out and how long does it take?
A whole-home repipe involves removing the existing supply lines throughout the home and running new PEX lines from the main supply to every fixture. The water is off for the duration of the work, which typically spans one to two days depending on the size of the home and the complexity of the existing layout. We confirm the scope and timeline before work begins. Once the new lines are in place, the system is pressure tested and every connection is checked before water is restored. The goal is a supply system that does not require patching again as individual joints fail.
Call (757) 656-3293 to talk through what your plumbing situation involves and get a price before anything is scheduled.